kyma•tweaky . Know .
SortByOperatingSystem
Choose your operating system below to see the problems and solutions for that platform:
Macintosh OS X
Windows XP
Macintosh OS 8.6 - 9.2.2
Windows 2000
Windows ME
Windows 98
All Platforms
Problems and solutions are listed under all operating systems to which they apply.
Macintosh OS X
Solved Problems
Wacom Bamboo compatibility
Always
Out of Realtime
in the DSP Status Window
Can Kyma run in a case sensitive file system?
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Certain fonts seem to be missing in Kyma following the installation of a Microsoft application.
Error on recording
Ignore Saved Preferences Dialog
How to search for keywords in the Kyma Forum
cannot DiskRecord from AudioInput
No Stop Sound on File Quit stops sound on File Quit
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
MacBookPro requires latest version of Kyma FireWire interface firmware and OSX operating system
Record to disk fails on first try; works on second try
Mouse mode in Wacom driver 4.93.3 is broken
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Spotlight opens when playing Sounds in Kyma
Menu bars in other applications are broken in Mac OS X 10.4 (Tiger)
Kyma loses contact with the Capybara.
Mac OS 10.3 is required in order to use a Wacom Tablet with Kyma X1
Damaged fonts can crash Kyma X1
Problem AccessingFilesFromSecondDrive
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
Apple made changes to OpenGL driver in 10.3.4 that causes a fault during splash page display. Solved in Kyma 6.08.
Scheduling problem with Script?
FileVault in OSX.3.2 Corrupting files
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Pop up menus appear on different monitor than they should
Macintoshes with multiple monitors not remembering window locations if menu bar not on left monitor
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Cannot find logisticMap.prg when using logisticMap.pci extra tool
Capybara hangs on disk playback
Filling in the WebForm for Know
Graphics corrupted after display sleep on Mac
Moving a window that is partly offscreen
Version number in Get Info
On Mac OS 10.2 graphics get corrupted
Capybara hangs on disk playback
Pending Problems
Invisible dialogs when dual monitors arranged vertically
Can,t connect Kyma and Saffire pro24
DSP audio levels do not correspond to actual output level.
WaitUntil Reaction
kyma fails to set the capybara as audio interface for pacarana.
Kyma fails to refresh windows after using expose
Audition - Spectral Analysis
Can't turn off Paca using hardware interface
SampleRate48kHz creat clicks
Kyma is not finding signal processor.
Permanent OORT after installing X.71 update
Cannot drag windows between multiple monitors without graphic distortion
BCF2000 doesn´t work in USB-mode (Paca)
3rd Party Capybara sounds are not compatible with Paca(rana)
Kyma not working on Capybara-66 with Leopard
drag and drop on second monitor doesn't work
RE Analysis Tool doesn't like different sample rates
Screen Does not redraw in Kyma sometimes
Blank icons in OS 10.4 (Tiger)
6.08->6.10 now won't launch
Clicking on the network icon, in OSX file dialog, crashes Kyma.
new file dialog not showing with multiple monitors
vcs not working as descibed
VCS too big for screen
Editing timelines away from Capy cause error
Kyma window activation
Can't quit Kyma if all windows are closed
Windows XP
Solved Problems
Always
Out of Realtime
in the DSP Status Window
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Ignore Saved Preferences Dialog
Getting the message, "Please make sure your Capybara interface is properly connected to your computer" after installing Kyma on a Windows XP machine.
How to search for keywords in the Kyma Forum
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
The Wacom tablet pen is not working properly with Kyma.
Mouse mode in Wacom driver 4.93.3 is broken
Defective PC-FW card results in Error 22 message
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Kyma loses contact with the Capybara.
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
windows stay blank, dragging windows is a problem, the content of windows is not refreshed anymore, etc. This problem appeared with my Win98-PC and with my WinXP laptop-PC
Graphics display problems in Kyma
Scheduling problem with Script?
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Capybara hangs on disk playback
Filling in the WebForm for Know
Capybara hangs on disk playback
Pending Problems
Can't turn off Paca using hardware interface
Permanent OORT after installing X.71 update
Sound flips channels
Multiple Display
Name of oscilloscope display not transfered to VCS
VCS too big for screen
Can't quit Kyma if all windows are closed
Macintosh OS 8.6 - 9.2.2
Solved Problems
Always
Out of Realtime
in the DSP Status Window
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Ignore Saved Preferences Dialog
How to search for keywords in the Kyma Forum
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
Mouse mode in Wacom driver 4.93.3 is broken
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Kyma loses contact with the Capybara.
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
Scheduling problem with Script?
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Mac OS9.2 Mouse not selecting items or scrolling / windows not replotting
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Pop up menus appear on different monitor than they should
Macintoshes with multiple monitors not remembering window locations if menu bar not on left monitor
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Cannot find logisticMap.prg when using logisticMap.pci extra tool
Capybara hangs on disk playback
Cannot find OpenGLLibrary under Mac OS 9
Missing OpenGL extension under Mac OS 9.1
Filling in the WebForm for Know
Version number in Get Info
Kyma.5 hangs with gray box at start up
Capybara hangs on disk playback
Pending Problems
Can't turn off Paca using hardware interface
Closing window on 2nd monitor crashes Kyma
VCS too big for screen
Working with ASIO under Kyma X and Mac OS 9
Can't quit Kyma if all windows are closed
Windows 2000
Solved Problems
Always
Out of Realtime
in the DSP Status Window
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Ignore Saved Preferences Dialog
How to search for keywords in the Kyma Forum
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
Mouse mode in Wacom driver 4.93.3 is broken
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Kyma loses contact with the Capybara.
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
windows stay blank, dragging windows is a problem, the content of windows is not refreshed anymore, etc. This problem appeared with my Win98-PC and with my WinXP laptop-PC
Scheduling problem with Script?
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Under Win2k, Flame can block use of optical drives
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Capybara hangs on disk playback
Filling in the WebForm for Know
Using FireWire crashes Windows 2000
Extra CD-ROM drive appears on Windows 2000
Capybara hangs on disk playback
Pending Problems
Can't turn off Paca using hardware interface
VCS too big for screen
Can't quit Kyma if all windows are closed
Windows ME
Solved Problems
Always
Out of Realtime
in the DSP Status Window
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Ignore Saved Preferences Dialog
How to search for keywords in the Kyma Forum
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
Mouse mode in Wacom driver 4.93.3 is broken
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Kyma loses contact with the Capybara.
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
windows stay blank, dragging windows is a problem, the content of windows is not refreshed anymore, etc. This problem appeared with my Win98-PC and with my WinXP laptop-PC
Scheduling problem with Script?
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Capybara hangs on disk playback
Filling in the WebForm for Know
Capybara times out at random on Windows ME
Capybara hangs on disk playback
Pending Problems
Can't turn off Paca using hardware interface
VCS too big for screen
Can't quit Kyma if all windows are closed
Windows 98
Solved Problems
Always
Out of Realtime
in the DSP Status Window
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Ignore Saved Preferences Dialog
How to search for keywords in the Kyma Forum
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
Mouse mode in Wacom driver 4.93.3 is broken
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Kyma loses contact with the Capybara.
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
windows stay blank, dragging windows is a problem, the content of windows is not refreshed anymore, etc. This problem appeared with my Win98-PC and with my WinXP laptop-PC
Graphics display problems in Kyma
Scheduling problem with Script?
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Capybara hangs on disk playback
Filling in the WebForm for Know
Capybara times out at random on Windows ME
Capybara hangs on disk playback
Pending Problems
Can't turn off Paca using hardware interface
When tooltips appear the VCS resizes
VCS too big for screen
Can't quit Kyma if all windows are closed
All Platforms
Solved Problems
Wacom Bamboo compatibility
Always
Out of Realtime
in the DSP Status Window
Can Kyma run in a case sensitive file system?
Paca(rana) power supply brick makes soft high frequency hiss when Paca(rana) is not turned on (goes away when I switch on the Pacarana).
Randomly moving asterix on front panel of Pacarana is screen saver
Certain fonts seem to be missing in Kyma following the installation of a Microsoft application.
Error on recording
Ignore Saved Preferences Dialog
Getting the message, "Please make sure your Capybara interface is properly connected to your computer" after installing Kyma on a Windows XP machine.
Hot values assigned via global map appear twice in VCS, with conflicting mappings
How to search for keywords in the Kyma Forum
cannot DiskRecord from AudioInput
No Stop Sound on File Quit stops sound on File Quit
*InterpolatePresets* with
ShowPresetValues
checked cannot be played in a Timeline.
MacBookPro requires latest version of Kyma FireWire interface firmware and OSX operating system
The Wacom tablet pen is not working properly with Kyma.
Record to disk fails on first try; works on second try
Mouse mode in Wacom driver 4.93.3 is broken
Defective PC-FW card results in Error 22 message
Blue light does not come on. Everything else OK.
Multisample from disk w/ MIDIVoice crashes Kyma
CrossFilter at 96khz sounds different
Spotlight opens when playing Sounds in Kyma
Menu bars in other applications are broken in Mac OS X 10.4 (Tiger)
Kyma loses contact with the Capybara.
Mac OS 10.3 is required in order to use a Wacom Tablet with Kyma X1
Damaged fonts can crash Kyma X1
Problem AccessingFilesFromSecondDrive
Missing step 10 control in AnalogSequencer
Unable to playback recorded Sounds
windows stay blank, dragging windows is a problem, the content of windows is not refreshed anymore, etc. This problem appeared with my Win98-PC and with my WinXP laptop-PC
Graphics display problems in Kyma
Apple made changes to OpenGL driver in 10.3.4 that causes a fault during splash page display. Solved in Kyma 6.08.
Scheduling problem with Script?
FileVault in OSX.3.2 Corrupting files
Gain in Timeline hides variables
In Kyma X, Timelines that have track inputs are substituted for the
replaceable inputs
of all Sounds in that track. (This behavior is different from Kyma.5 so some older Timelines may sound different in the new software until you set the replaceable inputs).
Hot TimeConstants in AmplitudeFollower and RMSSquared are incorrect above 0.08 s
Mac OS9.2 Mouse not selecting items or scrolling / windows not replotting
Playback direction
VCS Preset Problem
Working in digital mode is impossible.
Pop up menus appear on different monitor than they should
Macintoshes with multiple monitors not remembering window locations if menu bar not on left monitor
Under Win2k, Flame can block use of optical drives
Capybara times out when playing a Sound after the computer has just woken up
Archiving a Timeline (page 56) failed
No drivers necessary for Kyma X
Cannot find logisticMap.prg when using logisticMap.pci extra tool
Capybara hangs on disk playback
Cannot find OpenGLLibrary under Mac OS 9
Missing OpenGL extension under Mac OS 9.1
Filling in the WebForm for Know
Graphics corrupted after display sleep on Mac
Moving a window that is partly offscreen
Version number in Get Info
Capybara times out at random on Windows ME
On Mac OS 10.2 graphics get corrupted
Kyma.5 hangs with gray box at start up
Using FireWire crashes Windows 2000
Extra CD-ROM drive appears on Windows 2000
Capybara hangs on disk playback
Pending Problems
Invisible dialogs when dual monitors arranged vertically
Can,t connect Kyma and Saffire pro24
DSP audio levels do not correspond to actual output level.
WaitUntil Reaction
kyma fails to set the capybara as audio interface for pacarana.
Kyma fails to refresh windows after using expose
Audition - Spectral Analysis
Can't turn off Paca using hardware interface
SampleRate48kHz creat clicks
Kyma is not finding signal processor.
Permanent OORT after installing X.71 update
Cannot drag windows between multiple monitors without graphic distortion
BCF2000 doesn´t work in USB-mode (Paca)
3rd Party Capybara sounds are not compatible with Paca(rana)
Kyma not working on Capybara-66 with Leopard
drag and drop on second monitor doesn't work
When tooltips appear the VCS resizes
RE Analysis Tool doesn't like different sample rates
Screen Does not redraw in Kyma sometimes
Blank icons in OS 10.4 (Tiger)
Sound flips channels
Multiple Display
6.08->6.10 now won't launch
Clicking on the network icon, in OSX file dialog, crashes Kyma.
Name of oscilloscope display not transfered to VCS
new file dialog not showing with multiple monitors
vcs not working as descibed
Closing window on 2nd monitor crashes Kyma
VCS too big for screen
Working with ASIO under Kyma X and Mac OS 9
Editing timelines away from Capy cause error
Kyma window activation
Can't quit Kyma if all windows are closed
-----
Revision r1.1 - 11 Feb 2004 - 16:42 GMT -
KurtHebel
Copyright © 1999-2014 by the contributing authors. All material on this collaboration platform is the property of the contributing authors.
Ideas, requests, problems regarding kyma•tweaky?
Send
feedback.